Metallized Ceramic Insulator

Metallized Ceramic Insulator 1.ISO certified Factory Owner 2.Mo/Mn metallized 3.Glazed 4.For brazing with metals

Metallized Ceramics Insulator

Ceramic with metallization

Ceramic Insulator Tube

glazed ceramic tube

high alumina ceramic tube

Innovacera suppliers precision metallized ceramic components in alumium oxide ceramics for the military,medical and aerospace industries.Through spray,needle and brush coatings or screen printing our capabilities allow us to metallized on flat,cylindrical and complex ceramic bodies. Moly-Manganese is the typical base coat materials used for metallization.

Overview of Main Physical Properties:

1.Good electrical insulation

2.High mechanical strength

3.Excellent wear resistance

4.Excellent corrosion resistance

5.Low dielectric constant

Overview of Main Applications:

1.Pump seals and other components

2.Wear resistant inserts

3.Insulating washers or bushings

4.Semiconductor components

5.Aerospace components

6.Automotive sensors

7.Electrical or electronic insulators

Descriptions of Metallization Processing:

Metallization Processing(See Process Description Below)	Outer Diameter and Inner Diameter Banding
	Brush
	Screen Printing
	Spray
	Needle
Base Metallization Materials	Moly Manganese
	Tungsten Manganese
	Moly Tungsten Manganese
Materials for Metallization	Aluminum Oxide
	Beryllium Oxide (Restrictions Apply)
Metallization Characteristics/Benefits	Low Temperature Firing
	Universally Applicable
	Process Speed
	Uniform Coating, Thickness and Density
	No substrate deformation
Metallization Equipment	Domestic Furnaces
Industry Focus	Department of Defense
	Department of Energy
	Solar Product Manufacturing
	Aerospace
	Biomedical
	Communications
	Computer and Electronics
	Vacuum Electronics
	Medical
	Military
	Semiconductor
	Optical
Intended Applications for Metallization Products	Traveling Wave Tubes
	Vacuum Electronic Devices
	Medical Devices
	Photon Machines
	Neutron Generators
	X-Ray Tubes
	Klystrons
	High Vacuum Feed Through
	Relay Insulators
	E-Beam Technology

Available Metallization&Plating Specifications:

Available Ceramic Compositions	Al2O3 94%,97%,99.5%
Available Metallization Materials	Mo/Mn
Metallization Thickness	25±10um
Available Plating Materials	Ni/Ag/Au
Plating Thickness	2-10um

Material Specifications&Properties

We can supply the products according to customer's drawings, samples and performance requirements.

Overall Production Process:

Factory Tour:

1.Forming Method: Cold Isostatic Pressing:

In this process the powder is filled into a flexable mold generally prepared from rubber and then subjected to isostatic pressure via a fluid in a pressure chamber.

The rubber moulds rae relatively easy to produce but the process cycle itself is slow and so the method is appropriate for small series of components.

 

2.CNC Machining:

3.Sintering:

4.Metallization:

5. Glazing:

Packings:

Quality Control/Assurance Standard:

We are ISO certified: ISO9001:2008    ISO14001:2004    OHSAS18001:1999

The constant goal of Innovacera is a superior level of quality and sevice at competitive prices. Particular attention is given to the production of individual customer parts for both large and small runs. We implement a very sophisticated Quality Control process which we have our own customers certify. All parts that pass through our facility are visually and dimensionally inspected as well as calibrated. Our engineering staff is available for counsel and recommendations that will satisfy your ceramic requirements.

 

Superior quality of products with reliance is our prime consideration.

Feel free to contact us if you need any other assistance about our products.

We care and provide what you want!

Metallized Ceramic Insulator